test project

 Walk-in temperature test

       reference standard

      GB/T 2423.1-2008; IEC 60068-2-1: 2007
      GB/T 2423.2-2008; IEC 60068-2-2: 2007
      GB/T 2423.3-2016; IEC 60068-2-78: 2012
      GB/T 2423.4-2008; IEC 60068-2-30: 2005
      GB/T 2423.34-2012; IEC 60068-2-38: 2009
      GBT 2423.22-2012 IEC 60068-2-14-2009

       capabilities

 Temperature range: -40 ￣ 100 ℃;
 Humidity range: 20%RH~98%RH;
 Temperature conversion rate: 1℃/min;
 Working size: 2m × 2m × 2m.

The walk-in temperature (humidity) laboratory is specially used for testing aerospace, aerospace, automotive electronics, electrical products, materials, large parts and components, etc. for accelerated damp heat tests, alternating damp heat tests, constant damp heat tests, and can also be used for high and low temperature routine tests, cold resistance tests, and low temperature storage, in order to evaluate and analyze the performance and behavior under the proposed environmental conditions during the test.

Walk-in laboratory applications

Temperature cycling test walk-in constant temperature and humidity environment laboratory

The temperature change rate of the walk-in laboratory can meet the requirements of the required environment and stress screening test.

Storage and transportation tests

A walk-in laboratory can test product performance by simulating the environment in which your product will be stored and transported.

Inspection and testing of electronic devices

A walk-in laboratory can test the reliability of electronic products by simulating harsh environments. For example, under low humidity conditions, the impact of static electricity on the product is detected, and under high temperature conditions, the impact of static electricity on the product is detected.

automobile test

In the walk-in laboratory, different environments can be simulated to test the entire vehicle and parts, so as to correctly evaluate the performance and service life of the vehicle.

Equipment meets the following standards

GB/T 10592 – 2008 Technical Conditions for High and Low Temperature Test Chamber

GB/T 10586 – 2006 Technical conditions for moist heat test chamber

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2: Test methods Test A: Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2: Test methods Test B: High temperature

GB/T 2423.3-2006 Environmental testing for electric and electronic products-Part 2: Test methods Test Cab: Constant damp heat test

GB/T 2423.4-2008 Environmental testing for electric and electronic products-Part 2: Test methods Test Db: Alternating damp heat (12h +12h cycle)

GB/T 5170.1-2008 Inspection methods for environmental testing equipment for electric and electronic products-General principles

GJB 150.3A-2009 ** Equipment Laboratory Environmental Test Methods Part 3: High Temperature Test

GJB 150.4A-2009 ** Equipment Laboratory Environmental Test Methods Part 4: Low Temperature Test

GJB 150.9A-2009 ** Equipment Laboratory Environmental Test Methods Part 9: Damp Heat Test